Products
logo.png     
 

Metal Coating

 

CanSeal Metal Coating is a specifically formulated coating for applications over metal surfaces. Uses with Metal piping metal walls or other structures that require a good waterproofing membrane.

 

Frequently used on the exterior of metal and concrete pipes to prevent sweating and possible spalling (splitting or cracking) from freezing temperatures.

 

Metal roofs over time flex and move with the changing temperatures, this movement; although small have dramatic effects on the roof itself, eventually wearing down and cracking the seals under each metal screw. This is where leaking can occur. Also any protrusions or pipes that extend out of the roof can have their seals broken with the movement.  This movement and the constant rays of the sun can damage the protective coating on the metal itself.  When this starts to go, you see the rust begin.

 

CanSeal Metal Coating System:

 

  • Custom metal roof caulking gun perfectly seals each screw on the roof. (see the video to the right)
  • CanSeal Seam Tape seal vents, stacks, protrusions and gives reinforced protection! (See the video “CanSeal does metal roofs” to the right).
  • Asphalt and rubber composition stops rust and protects your roof, (also in the video).
  • Rubberized membrane that is flexible, impermeable and tear resistant.
  • No seams!
  • UV blocker prevents deterioration from sun.
  • Completely Odorless.
  • Non flammable.
  • Flexible Polymer capable of stretching to many times its size and recovering to its original dimension without blistering or cracking.
  • Water based sealant which is cost efficient and environmentally friendly, and is safe for the applicator.

 

 

 

Product Data Sheet Safety Data Sheet CanSeal Brochure

Roofing

CanSeal fluid applied on Roofing is a durable rubberized coating that restores commercial roof structures for many years of reliable protection.

The Benefits of CanSeal fluid applied Roofing:

 

  • New formulations make it the modern way to install commercial flat roofing.
  • Installs FAST to restore old roofs.
  • “Instant-set” fluid applied membrane gets you watertight faster.
  • No more logistics problems of getting heavy rolls to the roof.
  • The whole roof is your work space, no storage space required.
  • No seams or joints to worry about. It is one a single continuous membrane. Fully adhered!
  • Can be cleaned and applied again later to keep your roof going indefinitely!
  • Environmentally friendly roofing membrane system!
  • Can apply the extra white top coat “Cool Roof” and extend the warranty by 5 years and dramatically reduce the heat and UV deterioration on your roof. 

 

Why is CanSeal Spray On Roofing Different?

 

Spray on rubberized emulsion is fairly new. Many formulations exist which have varied characteristics. Some require long periods to cure, others can’t be rained on until cured, and others can cure too quickly in dry hot weather and shrink too much. Others have ingredients in them which, over time, begin to corrode the membrane... “It’s all in the formula!”

 

Roofs are one of the harshest environments for any-man made materials. That’s why, until recently, the best products were pre-formed in highly controlled factories. But there are limitations and on site constraints that drive up the cost of using these materials. They all require large trucks to carry and load these products. On commercial roofs it also takes large equipment to be lifted up to cut and remove the old roof, as well it requires large crews with highly skilled (and highly paid) roofers to apply the membranes. Each of the different membranes had their own special techniques and accessories to go along with it. If, during installation, any of these special techniques or accessories were compromised, it would affect the performance of the roof in the years to come and harsh weather could expose that compromise.

 

CanSeal fluid applied roofing and the CanSeal custom pump system deliver the two part emulsion mixture in the precise formula and instantly sets on the surface being coated. 

This gives you a new, durable, rubberized roofing membrane with the quality and durability of rubber and it is fully bonded to the roof and is easy to maintain.

 

To increase reflectivity and reduce heat absorption and to reduce air-conditioning in the summer and be part of the green movement for better building practices, the roof can be coated with “Cool Roof”. (See the pictures to the right.)

 

The “before” pictures show the old roofing system with seams every 36”, the “after” show them restored with CanSeal fluid applied membrane system. The entire roof is seamless!”

 

Product Data Sheet Safety Data Sheet CanSeal Brochure

Damp Proofing

CanSeal Dampproofing is an excellent spray on, quick set coating that is great for damp proofing situations.

CanSeal Mastic

CanSeal Mastic is a water based asphalt emulsion that adheres extremely well to all types of roofing, concrete and masonry foundation walls.

water proofing 1b

CanSeal Waterproofing is a durable rubberized coating that sprays on to concrete and masonry foundation walls and waterproofs its surface.

Subscribe to our mailing list

* indicates required
Yes, I would like to receive email updates.
  • I Consent

Contact Us

Head Office Canada
Innovative Manufacturing Inc. 
861 Derwent Way,
Delta, BC, Canada
V3M 5R4

Contact Keith
Toll Free: 1-800-667-8246 
Phone: 604-522-2811 ext. 106
Fax: 604-522-5141
Email: keith@innovativemfg.ca

 

Like us